BREAKWALL SHOREMEN

Works on Any Hard Surface, Made for the Long Haul

Vibrant Colors & Ultra-fine Details

Quick & Easy to Apply

Waterproof & Long Lasting Durability

INSTALLATION TIPS:

1. Prep Your Surface and Pre-Squeegee Your ENDURACal

Prepping the Area - When necessary, clean the surface of your item before applying the EnduraCal using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the longer it will endure natural elements, washing, and wear and tear. Although it will adhere without this, it is recommended.

Prep - After cutting your sticker/decal out, place the design face down with the white side facing up. Using the cloth, run over the whole design with hard pressure, back and forth 2-4 times. Additional pressure and repetitions should be applied on thin and separated design elements, such as small text.

2. Preparing your EnduraCal for Transfer

Gently peel the two sheets apart, watching to ensure the whole design lifts off onto the top carrier sheet.  We have a saying around here - Don’t peel with your hands, peel with your EYES. Designs which contain thin lines and small separated elements, such as small text, the slower you should peel. If parts don't lift, press from behind, and attempt to peel again from a different angle. 

3. Placing Your EnduraCal Onto Your Vehicle or Other Hard Surface

First, identify the placement area on your item.

For smaller designs (4 inches & under), carefully place the design onto the placement area with two hands controlling the placement.

For larger designs (6 inches & larger), you may find it easier to place the sticker starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping.Tip: Leave a corner of the carrier sheet unpressed to the product for easy peeling.

4. Completing the Transfer Process

After placing the design, firmly rub with a cloth 2-4 times. Peel slowly, watching to ensure all elements stick. Again, the lesson from the Dojo applies here - use your EYES and not just your hands. If any part of the design is not adhering, lay the carrier sheet back down, press and try peeling from a different angle.

Distinction & Disclaimer

EnduraCal Decals are extremely durable, color fast, chip & weather resistant stickers/decals, but they can still wear down or lose adhesion depending on the conditions & circumstances.  For that reason, we can’t make any warranties or guarantees and should not be used for mission-critical applications or equipment.

Note: These decals are quite durable, and therefore the adhesive is very strong.  They may be removed with adhesive remover and a plastic scraper, but please bear this in mind when determining their placement.  On vehicles, glass is often a safe choice for later removal.  DO NOT place a decal in any line of sight causing any distortion or inability to see out of, or operate any vehicle. 

If you are in Avon Lake, shipping is just a buck! Outside of Avon Lake? Shipping is $8.00.